MSX-1942-BX: 2.0 Ltr. Turbo Evo IV,V & VI CN9A Mantic Clutch Stage Series

*|MC:SUBJECT|*

MSX-1942-BX STAGES SINGLE PLATE

MAKE	MODEL	ENGINE SIZE	ENGINE ID	SERIES	YEAR
Mitsubishi	Lancer	2.0 Ltr .Turbo	4G63 CN9A	Evo IV	8/97-8/98
Mitsubishi	Lancer	2.0 Ltr .Turbo	4G63 CN9A	Evo V	1/98-12/98
Mitsubishi	Lancer	2.0 Ltr .Turbo	CN9A	Evo VI	1/99-11/01

The Mitsubishi Lancer Evolution, colloquially known as the ‘Evo,’ is a sports sedan and rally car based on the Lancer produced by Japanese automaker Mitsubishi Motors from 1992 to the present. While the Lancer and Lancer Evolution shared the same platform and DNA, there were many differences between the two cars, including power, drivetrain (FWD vs AWD), and a stiffer suspension on the Lancer Evolution.

Aside from its speed and handling abilities, the Evo is popular and desirable due to the “raw” nature of its performance. While many modern cars are more than capable of similar turns of speed (both straight and around corners), few do it with the same excitement and purity as the Evo.

Clutch Plate Dimensions: 230mm x 23T x 26.1mm

Why Would You Need an Upgraded Clutch?

The ability to customize your car’s ride is a less tangible but no less important reason to install a high-performance clutch. You get a performance boost as well as unique, race-inspired shifting that sets your car apart from every other stock version on the road. But it’s not just about shorter throws. Performance clutches hold higher torque capacity with better engagement and faster shifting.

The Mantic Stages Clutch System comes in a variety of configurations:

Stage 1 – This kit is developed primarily for the street performance niche, with more torque capability and better heat dispersion than the OE. The organic clutch disc has a high torque capacity cover, SG Iron ER² grooved pressure plate, and SG Iron ER² grooved pressure plate.
Stage 2 – A combination of organic and cerametallic friction components boost torque capacity while maintaining excellent driveability. As a result, the torque capacity is greater than that of a stage 1 kit, and the drivability is better to that of a stage 3 kit. The stage 2 package includes a high torque capacity cover assembly as well as a Spheroidal Graphite (SG Iron) casting with ER². Maximum strength and torque capabilities are provided by this technology. Organic friction material is used on the ER² pressure plate side of the clutch disc, whereas cerametallic friction material is used on the flywheel side.
Stage 3 – Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage 3 clutch kits feature a 20% increase (over original equipment) in clamp load for increased torque capacity. Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process. The Torque Capacity of a Clutch Plate can be increased by using exotic cerametallic friction material featuring a higher coefficient of friction. However, cerametallic material reduces pedal feel and results in more sudden clutch engagement, reducing street driveability. Mantic Stage 3 Clutch Kits feature cerametallic friction material on both sides of the clutch plate. This results in a strong torque capacity increase compared with Stage 2 – but reduced street driveability. Stage 3 kits include cushioned segments and a sprung hub to maintain a reasonable level of street drivability.
Stage 4 – Capable of handling a lot of torque, this system isn’t intended for street use. The cover assembly has a high torque capacity, an SG Iron pressure plate, and a sprung center cerametallic disc.
Stage 5 – Our most aggressive single disc application, is intended specifically for track and motorsport applications. The stage 5 kit includes a high torque capacity cover assembly with an SG iron burst-proof pressure plate, as well as a rigid hub and undamaged Cerametallic Clutch Disc.

Mantic Stage Series Mantic Stage 1 and Stage 2 clutch kit cover assemblies feature the patented ER² Groove Design, which is a unique pattern CNC machined on the friction face of the pressure plate. This groove has been specifically designed to increase the Mean Effective Radius of the pressure place and assist in heat dissipation. The increase in the Mean Effective Radius of the cover assembly gives a significant increase in the torque capacity.

Performance Clutch Kit

This Kit Includes:

Heavy Duty Cover Assembly

Clutch Plate

Release Bearing

Spigot Bearing

Clutch Alignment Tool

FULL MANTIC STAGE RANGE
BRAND	DETAILS	PART NUMBER	TORQUE CAPACITY
BRAND	DETAILS	PART NUMBER	PEAK	RATED
Mantic Stage 1	ER² Pressure Plate with Organic Disc	MS1-1942-BX	728Nm	583Nm
Mantic Stage 3	Cushioned Sprung Cerametallic Disc	MS3-1942-BX	1124Nm	899Nm
Mantic Stage 4	Sprung Centre Cerametallic Disc	MS4-1942-BX	1124Nm	899Nm
Mantic Stage 5	Cerametallic Disc	MS5-1942-BX	1124Nm	899Nm